TurbineDesk Back to 13 MW Package
SMT130 Start-Up
0%Engine start & generator online
Step 1 of 4
Step 1 – Issue Start Command
Do not start if any alarm or shutdown indication is active. Maximum 3 start attempts; identify cause before retrying after a malfunction stop.
HMI Reference
action
On the TCP window, click the Start button and click Ok.
monitor
Monitor Operation Sequence screen — observe crank → ignition → light-off → acceleration.
monitor
Vibration monitor changes from offset to normal settings during start.
monitor
ENGINE HOURS/START COUNTER (PC0470) begins logging — confirms engine fired.
monitor
START/STARTING Lighted Switch (SH0471) goes out — [Running] shows on screen header.
monitor
Turbine speed increases to 90%. Speed-sensing circuit assumes fuel control.
monitor
[Ready to Load] shows on screen header.
0/7 items checked